just fixed ylod when my son knocked motherbord of my bench and snaped the ps3 fan conecter off the motherboard can i bypass the conecter on motherboard so the fan will run :)

By snap do you mean like snapped it off the mobo with the trace and piece of the PCB board??

If so the best bet is to fallow the trace of the take a excto knife and shave the protective green over the trace, then take a solder and flux and join the fan to the trace. Then dabbing some hotglue over the solder points so the connection wont be ripped off.

:/ that kind of sucks but it happens lol.

Btw if your unsure how to get some of the green trace off, take the edge of the knife and lightly run it back and forth over the trace till you see copper or shiny you might have to clean off where you rub with alcohol to take off what little protective green stuff is left, take your time do not rush or you wil exsedently cut through the copper trace.